Products

PRODUCT DETAILS

CONTEX AROWEP ISO 100

PRODUCT CODE: INDT-10225

It is recommended for the lubrication of gearboxes (lubrication by oil bath, oil mist or oil circulation) and it is specifically suitable for heavy loads and high temperature.

PRODUCT DETAILS

CONTEX COLDCLEANER

PRODUCT CODE: MAIN-10204

This product is used to clean engines, machines and workshops. Suitable for high pressure steam cleaner. Eliminates the paraffinic protection coating of the bodywork.

PRODUCT DETAILS

CONTEX RADIATOR SEALER & CONDITIONER

PRODUCT CODE: MAIN-10203

Suitable for all aluminium, plastic and steel radiators of cooling systems in petrol, diesel and LPG engines. Compatible with water, cooling fluids and conventional anti freeze. Directions for use: Shake well before use and pour the content of the can into the cooling system with switched-on heating and warm (not hot) running engine. Keep engine running for approximately 10 minutes or drive a short distance. Be careful when opening the radiator/cooling system as hot coolant or steam might escape from the system. Dirty cooling systems should first be cleaned with Radiator Cleaner. The amount of 325ml is sufficient for cooling systems with a volume of up to 12 litres.

PRODUCT DETAILS

CONTEX RADIATOR CLEANER

PRODUCT CODE: MAIN-10202

Suitable for all aluminium, plastic and steel radiators of cooling systems in petrol, diesel and LPG engines. Compatible with water, cooling fluids and conventional anti-freeze. Directions for use: Shake well before use and pour the contents of one bottle into the radiator. Drive for about 30 minutes and drain the cooling system. Flush with water and refill the cooling system. Be careful when opening or draining the radiator/cooling system as hot steam or coolant might escape. One 325ml bottle is sufficient for cooling systems of up to 12 liters.

PRODUCT DETAILS

CONTEX OIL LEAK STOP

PRODUCT CODE: MAIN-10201

For all gasoline, diesel and LPG engines with or without turbochargers. Can be mixed with all commercially available engine oils. Does not clog filters and is not harmful for catalytic converters.Add the contents of one bottle to the warm oil. Make sure not to exceed the maximum oil level in the engine. One bottle (325ml) treats a crankcase of 3-6 liters.

PRODUCT DETAILS

CONTEX ENGINE FLUSH

PRODUCT CODE: MAIN-10200

For all gasoline, diesel and LPG engines, with or without turbochargers. Compatible with all mineral and synthetic motor oils.Directions for use : add one bottle to the hot engine oil before changing the oil. Run the engine for 15 minutes and drain the oil. Change the oil filter and refill the engine with an appropriate oil. One bottle treats 3 to 6 liters of engine oil.

PRODUCT DETAILS

CONTEX LPG TREATMENT

PRODUCT CODE: MAIN-10199

All LPG (gasoline) engines with injectors or carburetor. Will not harm catalytic converters.Pour the content of one bottle in the fuel tank before filling it with gasoline. One bottle treats 40 to 60 liters.

PRODUCT DETAILS

CONTEX DIESEL PARTICULATEFILTER CLEANER

PRODUCT CODE: MAIN-10198

For all diesel engines (including common rail and turbo charged engines) with standard or retrofitted diesel particulate filter. Pour the content of one bottle in the fuel tank before filling it with fuel. One bottle (325ml) treats 40-60 liters of diesel fuel.

PRODUCT DETAILS

CONTEX DIESEL TREATMENT

PRODUCT CODE: MAIN-10197

For all diesel engines, including common rail, with or without turbochargers. Add the content of one bottle to the fuel tank,prior to filling.The content of one bottle is sufficient for 50 to 60 litres of diesel fuel.

PRODUCT DETAILS

CONTEX LEAD SUBSTITUTE

PRODUCT CODE: MAIN-10196

All gasoline engines with injectors or carburetor which use unleaded fuel but require leaded fuel. Will not harm catalytic converters. Pour the content of one bottle in the fuel tank before filling it with gasoline. One bottle treats 40 to 60 liters. Apply at every tank filling.

Pages